Service manual

ELECTRICAL SPECIFICATIONS
SPEC
2 - 16
Neutral indicator light 12 V 1.7 W × 1
Turn signal indicator light 12 V 1.7 W × 1
High beam indicator light 12 V 1.7 W × 1
Fuel level indicator light LED
Engine trouble indicator light LED
Electric starting system
System type Constant mesh ----
Starter motor
Model (manufacturer) SM-13 (MITSUBA) ----
Power output 0.8 kW ----
Brushes
Overall length 10 mm (0.40 in) 5 mm
(0.20 in)
Spring force 7.65 ~ 10.01 N
(765 ~ 1,001 gf, 27.0 ~ 35.3 oz)
----
Commutator resistance 25 ~ 35 mΩ ----
Commutator diameter 28 mm (1.10 in) 27 mm
(1.06 in)
Mica undercut 0.7 mm (0.03 in) ----
Starter relay
Model (manufacturer) MS5F-411 (JIDECO) ----
Amperage 100 A ----
Coil resistance 4.18 ~ 4.62 Ω ----
Horn
Horn type Eddy ----
Model (manufacturer) × quantity YP-12 (NIKKO) × 2 ----
Max. amperage 2 A ----
Turn signal relay
Relay type Semi-transistor ----
Model (manufacturer) FB257H (DENSO) ----
Self-cancelling device built-in Yes ----
Turn signal blinking frequency 75 ~ 95 cycles/min. ----
Wattage 27 W × 2 + 3.4 W, 21 (23) W × 2 + 3.4 W ----
Fuel sender
Model (manufacturer) 4WM (NIPPON SEIKI) ----
Resistance 13 ~ 140 Ω at 20 ˚C (68 ˚F) ----
Sidestand relay
Model (manufacturer) G8R-30Y-B (OMRON) ----
Coil resistance 202 ~ 248 Ω ----
Diode Yes ----
Fuel pump maximum amperage 1 A ----
Fuel pump relay model (manufac-
turer)
G8R-30Y-B (OMRON) ----
Thermo switch model (manufac-
turer)
4TR (NIPPON TEXISAS INSTALL-
MENTS)
----
Item Standard Limit
2