Service manual

3 - 22
CHK
ADJ
CHANGING THE ENGINE OIL
EAS00073
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several
minutes, and then turn it off.
2. Place a container under the engine oil
drain bolt.
3. Remove:
• dipstick 1
• engine oil drain bolt (oil tank) 2
• engine oil drain bolt (engine) 3
4. Drain:
• engine oil
(completely from the oil tank and crank-
case)
5. If the oil filter cartridge is also to be
replaced, perform the following proce-
dure.
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
a. Remove the oil filter cartridge 1 with an
oil filter wrench 2.
b. Lubricate the O-ring 3 of the new oil fil-
ter cartridge with a thin coat of engine
oil.
ACHTUNG:
CAUTION:
Make sure the O-ring 3 is positioned cor-
rectly in the groove of the oil filter car-
tridge.
Oil filter wrench
YU-38411
3