Owner's Manual

8-21
EBU01068
Cooling system
1. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level will vary with engine tem-
perature. The coolant level should be be-
tween the maximum and minimum
marks.
1. Coolant reservoir cap
level mark
2. If the level is low, remove panel D. (See
pages 8-6–8-7 for panel removal and in-
stallation procedures.)
3. Remove the coolant reservoir cap, and
then add coolant or distilled water to raise
it to the specified level.
4. Install the coolant reservoir cap.
5. Install the panel.
1. Coolant reservoir drain hose
Coolant reservoir capacity:
0.25 L (0.22 Imp qt, 0.26 US qt)
U5TE10.book Page 21 Wednesday, April 10, 2002 10:32 AM