Owner's Manual

8-23
1. Place the ATV on a level surface.
2. Remove panels E and F. (See pages
8-10 and 8-11 for panel removal and in-
stallation procedures.)
3. Place a container under the engine, and
then remove the coolant drain bolt. (Use
a trough or a similar object as shown to
prevent coolant from spilling on the foot-
rest.)
1. Coolant drain bolt
1. Trough
4. Remove the front carrier and panel C.
(See page 8-9 for removal and installa-
tion procedures.)
U5TE10.book Page 23 Wednesday, April 10, 2002 10:32 AM