Owner's Manual

8-52
1. Headlight bulb holder
2. Remove the headlight bulb holder by
turning it counterclockwise.
3. Remove the defective bulb by pushing it
in and turning it counterclockwise.
4. Insert a new headlight bulb into the bulb
holder, push it in, and then turn it clock-
wise until it stops.
5. Install the bulb holder by turning it clock-
wise.
6. Install the cover at the rear of the head-
light.
WARNING
POTENTIAL HAZARD
The headlight bulb is hot when it is on
and immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
U5TE10.book Page 52 Wednesday, April 10, 2002 10:32 AM