Owner`s manual

8-18
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it
to the specified torque.
Changing the final gear oil
1. Remove the engine guard and the final
gear case guard by removing the bolts.
1. Engine guard 2. Final gear case guard
3. Bolt (× 11)
2. Place the ATV on a level surface.
3. Place a container under the final gear
case to collect the used oil.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 16 ft·lbf)
U1D910.book Page 18 Thursday, May 27, 2004 11:08 AM