Owner`s manual

8-21
CAUTION:
_
Be sure no foreign material enters the dif-
ferential gear case.
_
3. Install the differential gear oil filler bolt,
and then tighten it to the specified torque.
Replacing the differential gear oil
1. Place the ATV on a level surface.
2. Place a container under the differential
gear case to collect the used oil.
3. Remove the differential gear oil filler bolt
and differential gear oil drain bolt to drain
the oil.
1. Differential gear oil drain bolt
4. Install the differential gear oil drain bolt
and tighten it to the specified torque.
5. Fill the differential gear case with the rec-
ommended oil.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 16 ft·lbf)
Tightening torque:
Differential gear oil drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
U1D910.book Page 21 Thursday, May 27, 2004 11:08 AM