Owner`s manual

8-22
CAUTION:
_
Be sure no foreign material enters the dif-
ferential gear case.
_
6. Install the differential gear oil filler bolt,
and then tighten it to the specified torque.
7. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU12560
Cooling system
1. Place the ATV on a level surface.
2. Check the coolant level in the coolant
reservoir when the engine is cold as the
coolant level will vary with engine tem-
perature.
NOTE:
_
The coolant should be between the minimum
and maximum level marks.
_
1. Coolant reservoir cap
2. Maximum level mark 3. Minimum level mark
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.23 L (0.20 Imp qt, 0.24 US qt)
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 16 ft·lbf)
U1D910.book Page 22 Thursday, May 27, 2004 11:08 AM