Owner`s manual

8-49
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable
stand under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
1. Nut (× 4)
EBU11211
Wheel installation
1. Install the wheel and the nuts.
NOTE:
_
●
The arrow mark on the tire must point
toward the rotating direction of the wheel.
●
Tapered nuts are used for both the front
and rear wheels. Install the nut with its ta-
pered side towards the wheel.
_
1. Arrow mark
U1D910.book Page 49 Thursday, May 27, 2004 11:08 AM