User Manual

53
DTX-PROX Owner’s Manual
Connecting Separately Sold Add-ons and External Devices
Application Guide
 Integrating Electronic & Acoustic Drums
The following describes a couple of examples of how you can integrate electronic and acoustic drums.
 Adding Pads to an Acoustic Drum
Set
You can easily add a pad such as the XP125SD-X to an
acoustic drum set. Set the proper Pad Type for the con-
nected pad (TRIGGER/SETTING/Pad Type).
 Typical setup
 Playing the DTX-PROX Using
Acoustic Drums
You can attach a DT50K or DT50S Drum Trigger to the
bass drum or the snare drum and connect to the [!2KICK/
!3] jack or the [qSNARE] jack on the DTX-PROX to
send trigger signals to your drum trigger module whenever
the drum is struck. After connecting cables, set the pad
type parameter. (TRIGGER/SETTING/Pad Type)
 Typical setup (for attaching the Drum Triggers to the
snare and the bass drum)
XP125SD-X
DTX-PROX
KP128
For more information on how to attach the Drum Trigger,
refer to the DT50S/DT50K Owner’s Manual.
DT50S
DT50K
to DTX-PROX
DT50S
DTX-PROX
DT50K