User Manual

Grouping Students
If simply pairing students isn’t flexible enough for your needs, the LC4 Lab allows you to create
easily recallable Groups. Think of a Group as a kind of virtual practice room in which multiple
students can meet at the same time. You can have as many as four Groups (A/B/C/D) set up in the
Controller at any given time. To group a set of students, press and hold GROUP button A, B, C
or D as desired, select the BANK for the student(s) desired, and turn on the appropriate student
buttons for that Group. Students from different banks may be grouped together in any combination
within the four available Groups.
A flashing light next to Group button A, B, C or D indicates that the teacher is currently working
with that Group. A steady light next to button A, B, C and D indicates that the Group is active and
working with each other but without the teacher.
Keep in mind that RECALL MEMORY 7 and RECALL MEMORY 8 are factory pre-set Groups for
engaging and clearing. RECALL MEMORY 7 sets up GROUP A with all student buttons on… a
MEGAGROUP (Groups B/C/D are empty in this memory). RECALL MEMORY 8 has all four
Groups empty of students. To create this clean slate as a starting point for building Groups, simply
tap the RECALL button and then tap student button 8.
Example One
To set students 1, 3, 7 and 8 into a Group, press and hold GROUP button A, select BANK 1-8,
press student 1 then 3 then 7 then 8. Release the GROUP button A and it will begin to flash,
indicating the Group is active and the teacher is with them. To speak with the Group, turn on
the MIC button.
16 24
32 40 48
9 17
25 33 41
10 18
26 34 42
11 19
27 35 43
12 20
28 36 44
13 21
29 37 45
14 22
30 38 46
15 23
31 39 47
10
(3)
(4
)
(5)
(6)
T
AP
(2)
TA
P
TA
P
T
AP
T
AP
(1)
H
OL
D
DP7949 LC4 Manual - Operation Guide.qxp_Layout 1 3/24/15 8:39 AM Page 10