User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Graphic EQ, effects, and Premium Rack
Reference Manual
125
Editing the internal effect parameters
This section explains how to change the effect type and edit the parameters.
1. Follow steps 1–3 described in “Virtual rack operations” on page 115, to mount an
effect in a rack.
A rack in which an effect is mounted will show the following information.
1 Effect title/type
This area indicates the effect title, the name of the type that is used, and a graphic. The number of
input/output channels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also shown.
2 Input/output meters
Indicate the level of the signals before and after the effect.
2. Press the rack in which the effect you want to edit is mounted.
The EFFECT popup window will appear, allowing you to edit the effect parameters. In the
EFFECT popup window you can use the tabs to switch among the eight racks (EFFECT 1 –
EFFECT 8).
1 INPUT PATCH buttons
Press these buttons to open the CH SELECT popup window.
2 OUTPUT PATCH buttons
Press these buttons to open the CH SELECT popup window.
3 Effect type field
Displays the effect title, the name of the type that is used, and a graphic. The number of input and
output channels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also shown. Press this field to open
the EFFECT TYPE popup window, in which you can select the effect type.
4 EFFECT CUE button
Enables you to cue-monitor the output of the currently-displayed effect. This Cue function is
valid only while this screen is displayed. The cue will be canceled automatically when you switch
to a different screen.
5 Special parameter field
Indicates special parameters that are specific to some effect types.
6 BYPASS button
Temporarily bypasses the effect.
7 Input/output meters
Indicate the level of the signals before and after the effect.
8 Effect parameter field
This area indicates parameters for the currently-selected effect type. When you press a knob in
this field, you will be able to use the multifunction knobs to control the corresponding horizontal
row of knobs.
You can also make fine adjustments by rotating a knob while pressing and holding it down.
9 Rack select tabs
Use these tabs to switch among EFFECT 1–8.
1 2
7
6
1
9
8
243 5