User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
I/O device and external head amp
Reference Manual
138
I/O device and external head amp
This chapter explains how to use an I/O device or an external head amp that is connected to the CL
series console.
Before you proceed, use DANTE SETUP to specify the I/O devices that will be mounted. For details,
refer to “Mounting an I/O device on the Dante audio network” on page 217.
Using an I/O device
CL series consoles enable you to remotely control channel parameters of an I/O device (such as an Rio
series product) connected to the Dante connector.
For details on connecting the CL series console to an I/O device, refer to the “Connecting to I/O
devices” section in the separate Owner’s Manual.
I/O device patching
Here’s how an I/O device connected to the Dante connector can be patched to the Dante audio network.
1. Connect the CL series console to an I/O device.
For details, refer to the “Connecting to I/O devices” and “Quick Guide” sections in the separate
Owner’s Manual.
2. In the function access area, press the I/O DEVICE button to access the I/O DEVICE
screen.
3. In the upper part of the I/O DEVICE screen, press the DANTE PATCH tab to access
the DANTE PATCH field.
The DANTE PATCH field includes the following items.
1 I/O device list
This shows the ID number and model name of the I/O devices.
Press here to access the OUTPUT PATCH popup window, where you can specify patching from
the console’s output ports to the I/O devices.
2 DANTE SETUP button
Press this button to open the DANTE SETUP popup window, in which you can make settings for
the audio network.
3 DANTE INPUT PATCH button
Press this button to open the DANTE INPUT PATCH popup window, in which you can select any
of 64 channels that will be input from the I/O devices to the console.
4 OUTPUT PORT SETUP button
Press this button to access the PATCH VIEW 1 tab of the OUTPUT PORT popup window, where
you can choose the 64 channels that will be output from the console’s output ports to I/O devices.
4. To specify the 64 channels that will be input from the I/O devices to the console,
press the DANTE INPUT PATCH button.
The DANTE INPUT PATCH popup window will appear. This popup window includes the
following items.
1
2
3
4