User Manual

Table Of Contents
Recorder
Reference Manual
183
2 Channel select buttons
Select the channels that will be patched to the USB memory recorder’s playback outputs, from the
following choices.
CH1–72....................................... INPUT channels 1–72
STIN 1L/1R–STIN 8L/8R........ ST IN channels 1–8 L/R
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
8. Use the category list and the channel select buttons to select the channel that you
want to patch to the USB memory recorder output.
If you select a channel to which another signal is already patched, a dialog box will ask you to
confirm the patch change. Press the OK button in the dialog box.
NOTE
The recorder playback output can be patched to multiple channels.
9. When you have finished assigning the channel, press the CLOSE button.
You will return to the RECORDER screen.
10. Assign a channel to the other output in the same way.
Recording audio to a USB flash drive
You can record the signal of the desired output channels as an audio file (MP3) onto the USB flash drive
inserted in the USB connector located to the right of the display.
1. In the Function Access Area, press the RECORDER button to access the RECORDER
screen.
2. Press the USB tab in the upper right of the screen.
TRANSPORT field
This field enables you to control recording and playback of a song.
1 Current song
Indicates the currently-selected songs track number, title and artist name. The following
indicators will appear during playback or recording.
2 Elapsed time display
Indicates the elapsed playback time of the current song during playback, and the elapsed
recording time during recording.
1
2
3 4A0987 5 6
C
B
Playing Recording