User Manual

Appendices
Reference Manual
271
Warning/Error Messages
Message Meaning
xxx Parameters Copied. Parameter xxx was copied to the copy buffer.
xxx Parameters Initialized. Parameter xxx was initialized.
xxx Parameters Pasted. Parameter xxx was pasted from the copy buffer.
xxx Parameters Swapped with Copy Buffer.
Parameter xxx was exchanged with the contents of the copy
buffer.
ALTERNATE FUNCTION: Turned off! ALTERNATE FUNCTION was turned off.
Assignment is Restricted to Max. 8 Sources!
The Monitor Define function allows a maximum of eight sources
to be selected, but you attempted to assign more than eight.
Cannot Assign!
In the USER DEFINED KEYS popup of the CL3/CL1, you attempted
to edit an item that cannot be edited for that model.
Cannot Bookmark This Popup. This popup window cannot be bookmarked.
Cannot Mount This Type of Device in This
Position.
You attempted to mount a specific device at a position where it
cannot be mounted.
Cannot Paste! Cannot paste the character string.
Cannot Recall! Failed to recall a scene memory or library.
Cannot Select This Channel.
You attempted to select a channel that cannot be operated due to
your user level or some other reason.
Cannot Store! Failed to store a scene memory or library.
Cannot Undo! You pressed the [UNDO] button when Undo was not available.
Channel Copied. Channel settings have been copied.
Channel Moved. Channel settings have been moved.
Channel Returned to Default Settings. Channel settings have been returned to the default settings.
Couldn’t Access File. File on the USB flash drive could not be accessed for some reason.
Couldn’t Write File. File could not be saved to the USB flash drive.
Current User Changed. [xxx] Current user was changed to [xxx].
Directory Not Empty!
You attempted to delete a directory, but failed because there were
files remaining in the directory.
EDITOR: Data Framing Error!
EDITOR: Data Overrun!
Invalid signals are being exchanged with CL Editor.
EDITOR: Rx Buffer Full! Too much data is being received at the CL Editor input port.
EDITOR: Tx Buffer Full!
Too much data is being transmitted from the CL Editor output
port.
EFFECT CUE: Turned Off.
CUE was defeated because you switched from the EFFECT popup
window or the premium rack popup window to a different screen.
External HA Connection Conflict!
External HA data could not be recalled, because the state of
connections to the external HA has changed since the scene was
stored.
External Power Supply is Cut Off!
The PW800 (EXT) power supply connected to the CL series
console has stopped operating.
File Access is Busy!
The following operation has not been performed yet because the
USB flash drive is being accessed.
File Already Exists!
The USB flash drive already contains a file/directory with the same
name as the one you are attempting to save, rename, or create.
File Error [xx]! Internal file access error
File Protected!
Overwriting was not possible because the file on the USB flash
drive is write-protected.
Flash Memory Initializing Finished. Memory initialization has been completed.
Help File Not Found! The help file has not been loaded.
Illegal Address! The IP address or Gateway address setting is invalid.
Illegal MAC Address! Cannot Use Network.
Communication via the Network connector is not possible
because the MAC address setting has been damaged for some
reason. Please contact your Yamaha service center listed at the
end of the Owner’s Manual (separate document).
Illegal Storage Format!
The USB flash drive could not be accessed because its format is
invalid or unsupported.
Internal Power Supply is Cut Off!
The internal (INT) power supply has stopped operating.
Alternatively, some other problem has occurred. Contact a
Yamaha service center listed at the end of the owner’s manual
(separate document).
Internal Power Supply is Turned On. The internal (INT) power supply has started up normally.
KEY IN CUE: Turned Off.
KEY IN CUE was defeated because you switched from the
DYNAMICS 1 popup window of an input channel to a different
screen.
Loading Aborted. Loading from USB flash drive was aborted.
Loading Finished. Finished loading from USB flash drive.
Low Battery! The backup battery voltage is low.
Maximum Number of Audio Files Exceeded!
The number of songs that can be managed by the USB memory
recorder has been exceeded.
Memory Error! All Memories were
Initialized.
All data has been initialized because the data in internal backup
memory has been lost, due to failure of the backup battery or
some other reason. Please contact your Yamaha service center
listed at the end of the operating manual (separate document).
MIDI: Data Framing Error!
MIDI: Data Overrun!
An inappropriate signal is being input to the MIDI input port.
MIDI: Rx Buffer Full! Too much data is being received at the MIDI input port.
MIDI: Tx Buffer Full! To much data is being transmitted from the MIDI output port.
No Access From Recorder!
In the RECORDER screen, it is not possible to move to a level
higher than \YPE\SONGS\.
No channel selected.
A copy-source channel was not selected in the GLOBAL PASTE
screen.
No Copy Item Selected.
In the Global Paste screen, you attempted to paste without
having selected an item to paste.
No Corresponding Help Items. The corresponding section was not found in the Hlep file.
No ID3 Tag exists. You can not edit. The music file cannot be edited because it has no ID3 tag.
No Response from External HA. No response from an external AD8HR.
No Response from I/O DEVICE. The I/O devices not responding.
Message Meaning