User Manual

ManualsBrandsYamaha ManualsMY cards and interfacesRack E/S

268

269

270

271

272

273

274

275

276

277

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

Appendices

Reference Manual

273

Electrical characteristics

All faders are nominal when measured. Output impedance of signal generator:150ohms

■ Frequency Response. Fs= 44.1 kHz or 48 kHz @20 Hz–20 kHz, referenced

to the nominal output level @1 kHz

■ Gain Error. Fs= 44.1 kHz or 48 kHz @1 kHz

■ Total Harmonic Distortion. Fs= 44.1 kHz or 48 kHz

* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz

■ Hum & Noise. Fs= 44.1 kHz or 48 kHz, EIN= Equivalent Input Noise

*Hum & Noise are measured with A-weight filter.

■ Dynamic Range. Fs= 44.1 kHz or 48 kHz

* Dynamic Range are measured with A-weight filter.

■ Sampling Frequency

Input Output RL Conditions Min. Typ. Max. Unit

OMNI IN 1-8

OMNI OUT 1-8 600 Ω

GAIN: +66dB

–1.5 0.0 0.5

PHONES 8 Ω –3.0 0.0 0.5

Input Output RL Conditions Min. Typ. Max. Unit

OMNI IN 1-8 OMNI OUT 1-8 600 Ω

Input level : –62 dBu , GAIN : +66 dB

 Output level +4.0 dBu (Typ.)

–2.0 0 2.0

Input level : +10 dBu , GAIN : –6 dB

 Output level +4.0 dBu (Typ.)

Internal OSC

OMNI OUT 1-8 600 Ω

Full scale output, Output level :

+24.0 dBu (Typ.)

–0.5 0 0.5

PHONES 8 Ω

–30 dBFs, phones level control : max.

 Output level 0 dBu (Typ.)

–0.5 0 0.5

Input Output RL Conditions Min. Typ. Max. Unit

OMNI IN 1-8 OMNI OUT 1-8 600 Ω

+4 dBu @20 Hz–20 kHz, GAIN: +66dB 0.1

+4 dBu @20 Hz–20 kHz, GAIN: –6dB 0.05

Internal OSC

OMNI OUT 1-8 600 Ω Full Scale Output @1 kHz 0.02

PHONES 8 Ω

Full Scale Output @1 kHz, PHONES Level

Control: Max.

0.2

Input Output RL Conditions Min. Typ. Max. Unit

OMNI IN 1-8 OMNI OUT 1-8 600 Ω

Rs= 150 Ω, GAIN: +66dB

Master fader at nominal level and one

Ch fader at nominal level.

–128

EIN

dBu

–62

Rs= 150 Ω, GAIN: –6dB

Master fader at nominal level and one

Ch fader at nominal level.

–84 –79

All INPUTs OMNI OUT 1-8 600 Ω

Rs= 150 Ω, GAIN: –6dB

Master fader at nominal level and all

OMNI IN 1-8 in faders at nominal level.

–70

— OMNI OUT 1-8 600 Ω Residual Output Noise, ST Master Off –88

—PHONES 8 Ω

Residual Output Noise, PHONES Level

Control Min.

–88

Input Output RL Conditions Min. Typ. Max. Unit

OMNI IN 1-8 OMNI OUT 1-8 600 Ω AD + DA, GAIN: –6dB 108 dB

— OMNI OUT 1-8 600 Ω DA Converter 112 dB

Parameter Conditions Min. Typ. Max. Unit

External Clock

Frequency

Range

Fs= 44.1 kHz

Fs= 45.9375 kHz (44.1 kHz +4.1667%)

Fs= 44.1441 kHz (44.1 kHz +0.1%)

Fs= 44.0559 kHz (44.1 kHz –0.1%)

Fs= 42.336 kHz (44.1 kHz –4.0%)

–200 +200 ppm

Fs= 48 kHz

Fs= 50 kHz (48 kHz +4.1667%)

Fs= 48.048 kHz (48 kHz +0.1%)

Fs= 47.952 kHz (48 kHz –0.1%)

Fs= 46.080 kHz (48 kHz –4.0%)

Jitter of PLL

DIGITAL IN Fs= 44.1 kHz

DIGITAL IN Fs= 48 kHz

10 ns

Internal Clock

Frequency

Word Clock : Int 44.1 kHz 44.1

kHz

Word Clock : Int 48 kHz 48

Accuracy

Word Clock : Int 44.1 kHz

–50 +50 ppm

Word Clock : Int 48 kHz

Jitter

Word Clock : Int 44.1 kHz 4.429

Word Clock : Int 48 kHz 4.069