User Manual

ManualsBrandsYamaha ManualsMY cards and interfacesRack E/S

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

Input channels

Reference Manual

5. Use the MODE button to select either ST/MONO mode or LCR mode for each

channel.

6. In the MASTER section on the top panel, make sure that the [ON] key for the

STEREO channel/MONO channel is turned on, and then raise the fader to an

appropriate level.

7. In the INPUT section on the top panel, make sure that the [ON] key is turned on

for the input channel you want to control, and then raise the fader to an

appropriate position.

The subsequent steps will differ depending on whether ST/MONO mode or LCR mode was selected

for the channel in step 5.

■ Channels for which ST/MONO mode is selected

8. In the TO STEREO/MONO popup window, use the STEREO/MONO button to

individually turn on/off the signal sent from the input channel to the STEREO bus/

MONO bus.

For a channel that is set to ST/MONO mode, signals sent to the STEREO bus and to the MONO

bus can be switched on or off individually.

9. In the TO STEREO/MONO popup window, use the TO ST PAN knob to set the

panning of a signal sent from the input channel to the STEREO bus.

■ Channels for which LCR mode is selected

8. In the TO STEREO/MONO popup window, use the LCR button to turn signals sent

from the input channel to the STEREO bus/MONO bus on or off collectively.

For a channel that is set to LCR mode, signals sent to the STEREO bus and to the MONO bus are

switched on or off collectively.

9. In the TO STEREO/MONO popup window, use the CSR knob to adjust the level

difference between signals sent from that channel to the STEREO (L/R) bus and to

the MONO (C) bus.

10. In the TO STEREO/MONO popup window, use the TO ST PAN knob to set the

panning of signals sent from the input channel to the STEREO bus and MONO (C)

bus.

If the CSR knob is set to 0%, operating the TO ST PAN knob of an INPUT channel will change

the level of signals sent to the STEREO (L/R) bus and MONO (C) bus, as shown in the following

diagram. In this case, the TO ST PAN knob operates as a conventional PAN knob, and no signal

is sent to the MONO (C) bus.

Operating the TO ST BALANCE knob of a STEREO channel will change the level of signals sent

from the STEREO L/R channels to the STEREO (L/R) bus and MONO (C) bus, as shown in the

following diagram. In this case, the TO ST PAN knob operates as a conventional BALANCE knob,

and no signal is sent to the MONO (C) bus.

CLR

TO ST PAN knob

Signal sent to the STEREO (L) bus

Signal level

Signal sent to the STEREO (R) bus

CLR

TO ST BALANCE knob

Signal sent from the STEREO (L) channel to

the STEREO (L) bus

Signal level

CLR

TO ST BALANCE knob

Signal sent from the STEREO (R) channel to

the STEREO (R) bus

Signal level