User Manual

ManualsBrandsYamaha ManualsMY cards and interfacesRack E/S

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

SELECTED CHANNEL section

Reference Manual

SELECTED CHANNEL VIEW screen

■ SEND field

In this field, you can view the send level from the channel to each MIX/

MATRIX bus, switch the on/off status of the send signals, and switch between

pre and post.

1 Tabs

Enable you to select a group of 16 output bus channels to be displayed

in the SEND field.

• MIX1–16 tab.............................. displays MIX buses 1–16.

• MIX17–24/MATRIX tab......... displays MIX buses 17–24 and

MATRIX buses 1–8.

The view and the function of the knobs and buttons in the SEND field vary

depending on whether a pair of bus channels (odd-numbered and even-

numbered) are comprised of two mono channels or a stereo channel.

If the destination bus channels are two mono channels:

1 SEND knob

Sets the send level to the corresponding bus.

2 PRE indicator

Indicates the send point of the corresponding bus. If the PRE button on the MIX SEND 8ch screen

is turned ON, this PRE indicator will be turned on.

3 ON button

Switches the send signal to the corresponding bus on or off.

If the destination bus is a stereo channel:

1 SEND/PAN knob

The right-hand knob adjusts the level of the signal sent to a pair of bus channels (even-numbered

and odd-numbered). The left-hand knob adjusts the pan and balance of the same signal.

2 PRE indicator

Indicates the send point of the corresponding bus. If the PRE button on the MIX SEND 8ch screen

is turned ON, this PRE indicator will be turned on.

3 ON button

Press the right-hand button to switch on or off the signal sent to two bus channels.

NOTE

• If the indices of a SEND/PAN knob are white, the send point is assigned as PRE; if the indices

are black, it is assigned as POST.

• If the send point is PRE, you can specify the PRE point as either VARI [PRE EQ] or VARI [PRE

FADER] in the BUS SETUP popup that appears when you press the SETUP button → BUS

SETUP button.

• If the type of the destination bus is set to FIXED, controllers

1–2 mentioned above will not be

displayed. The send level will be fixed at nominal level, and the send point will be fixed at POST

FADER. For details, see “Basic settings for MIX buses and MATRIX buses” on page 202.

• Press the SEND LEVEL knob or PAN knob on screen to open the SEND 8ch popup window.