User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Scene memory
Reference Manual
95
4. Press the song select popup button for a scene to which you want to link the audio
file. The SONG SELECT popup window will appear.
In this popup window, you can select an audio file you want to link with the scene, and set the
offset time.
1 Change directory button
Press this button to move to the next higher level.
NOTE
You cannot move to levels higher than \YPE\SONGS\.
2 PATH indicator
This area indicates the current directory path.
3 SONG TITLE/FILE NAME switch buttons
Switch between the song title list and the file name list.
4 SONG TITLE list button
5 ARTIST list button
Press these buttons to sort the audio file list (at the current directory level) by song title and artist
name respectively.
6 Song list
Displays the title, artist name, and audio file time duration of the audio files in the \YPE\SONGS\
folder. You can select an audio file by pressing the audio file name.
7 OFFSET knob
You can use the multifunction knob to set the time duration from scene recall until the start of
audio file playback.
8 Scroll knob
Use the multifunction to scroll the list.
5. Press the screen or use the multifunction knobs to select a file that you want to link
to a scene.
6. If desired, use the corresponding multifunction knobs to set the offset (the time
duration until the start of audio file playback).
The offset value can be adjusted in the range of 0.0–99.0 in 0.5 sec steps.
7. Press the OK button.
The title of the selected song will appear in the center of the song list.
If you select the CANCEL button instead of the OK button, your settings will be discarded and
the unit will return to the SCENE LIST popup window.
8. Press the PLAY button to turn on the link to the audio file.
The PLAY button will light in the LINK field. The PLAY indicator will appear in the STATUS field
on the COMMENT tab.
9. Repeat steps 4–8 to link audio files to other scenes.
10. Recall a scene to which an audio file has been linked.
After the offset time duration has elapsed, the specified audio file will play one time.
NOTE
• After a scene has been recalled and until the offset time has elapsed, a countdown will appear in
the Function Access Area.
• If another song is playing during a scene recall, the song playback will stop when the scene is
recalled, regardless of the offset time setting.
7
1
8
2 3
4
5
6