User Manual
Table Of Contents
- ■ Using the PDF manual
- ■ System Requirements
- ■ Setup
- ■ Operating R Remote
- ■ Uninstalling the software(Removing the application)
- ■ Troubleshooting
R Remote Version 3 User’s Guide 18
Edit window
This appears if you double-click in the main area other than on a controller, or if you right-click and
choose [Open Edit Window].
Here you can view and edit detailed HA settings for the device. To close the window, click the [x]
button in the upper right if you're using Windows, or click the [x] button if you're using Mac.
The screen is explained here using the Rio3224-D as an example. The number of channel switching
tabs differs depending on the model.
① Device name
Shows the UNIT ID number and name of the device.
② [PEAK HOLD] button
If this button is on, the peaks of each level meter are held. When you turn this off, the peaks that
had been held are cancelled.
③ Port select tab
For the Rio3224-D or Rio1608-D, these tabs switch the ports that are shown.
④ Port index
Indicates the port number of the device. When you press this with the left mouse button, the
indicator of the corresponding port of the device will light.
⑤ [+48V] button
Turns the HA phantom power on/off.