User Manual
Table Of Contents
- Copyright
- About Audinate
- Introduction
- Installing Dante Controller
- Dante Basics
- Discovery and auto-configuration
- Device Channels
- Differentiating between input and output channels
- Device Names and Channel Labels
- Routing Audio
- Clock Synchronization
- Latency
- Device Lock
- Dante Control and Monitoring
- Starting Dante Controller
- Using Dante Controller
- Network View
- Status Bar
- Network View Tabs
- Channel Groups
- Clock Status Monitoring
- Clock Status Monitor
- Automatic Notification of Device Errors
- Device View
- Device View Tabs
- Multicast Transmit Flow Configuration
- Using Dante Controller with Dante Domain Manager
- Presets
- Troubleshooting
- Fanout
- Messages on Startup
- Computer Configuration Checklist
- Troubleshooting Dante IP Address Configuration
- Troubleshooting Switch Configuration and Cabling
- Index
Dante Controller User Guide
Copyright © 2018 Audinate Pty Ltd. All rights reserved.
-87-
2.
Click DDM Server Connection.
The DDMServer Connection dialog is displayed:
3. In the DDM Server Connection dialog, either:
n Select 'Auto Discovery' to search for a DDM server automatically*, or:
a. Select 'Manual' to provide a specific IPaddress or FQDN(requires DNS)and port number.
b. Enter the DDM server IP address or FQDN.
4. ClickUse This Server.
5.
In the DDMUser Login dialog, enter your username and password.
6. Click Log In.
* Auto Discovery requiresDNS if DanteController and the DDMserver are in different IPsubnets.