User Manual
Table Of Contents
- Copyright
- About Audinate
- Introduction
- Installing Dante Controller
- Dante Basics
- Discovery and auto-configuration
- Device Channels
- Differentiating between input and output channels
- Device Names and Channel Labels
- Routing Audio
- Clock Synchronization
- Latency
- Device Lock
- Dante Control and Monitoring
- Starting Dante Controller
- Using Dante Controller
- Network View
- Status Bar
- Network View Tabs
- Channel Groups
- Clock Status Monitoring
- Clock Status Monitor
- Automatic Notification of Device Errors
- Device View
- Device View Tabs
- Multicast Transmit Flow Configuration
- Using Dante Controller with Dante Domain Manager
- Presets
- Troubleshooting
- Fanout
- Messages on Startup
- Computer Configuration Checklist
- Troubleshooting Dante IP Address Configuration
- Troubleshooting Switch Configuration and Cabling
- Index
Dante Controller User Guide
Copyright © 2018 Audinate Pty Ltd. All rights reserved.
-92-
If a role is applied to a device that is different from the role's originating device - for example, a role for
console model A is applied to console model B - Dante Controller will identify any issues that might arise
(such as unsupported sample rates) and will display those issues so they can be addressed - or ignored, if
they are not important.
Saving Presets
To save a Preset that includes all device parameters:
1.
Click the ‘Save Preset’ button in the main toolbar:
2.
Select the devices that you wish to include in the preset.
Click All to select all devices, or None to clear all selections.
3. Click Save.
To save a Preset that includes a selection of device parameters:
1. Click the ‘Save Preset’ button in the main toolbar.
2. Click Advanced.
3. Select the devices that you wish to include in the preset.
4. Select the parameters that you want to save for the selected devices.
5. Click Save.
Presets are saved as an xml files, which can be manually edited if required, using a text editor.