Owner`s manual

Trouble Recovery
99
inal position, and then install the filter
cup onto the filter housing. NOTICE: Be
careful not to twist the water detec-
tion switch lead when screwing the
filter cup onto the filter housing.
[ECM01970]
8. Connect the water detection switch cou-
pler securely until a click is heard.
9. Install the fuel filter cover, and then tight-
en the bolts.
10. Install the top cowling.
11. Turn the main switch to the “ ” (on) po-
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
arator-alert indicator blinks or the buzzer
sounds, have your Yamaha dealer
check the outboard motor. NOTICE: Al-
though the buzzer will stop when the
engine is started and the control lever
is moved to the forward or reverse
position, do not use the outboard mo-
tor. Otherwise, serious engine dam-
age could occur.
[ECM02480]
EMU33501
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
[ECM00401]
1. O-ring
2. Filter cup
3. Water detection switch lead
2
3
1
ZMU07522
6CE-9-34-1E0.book 99 ページ ２０１２年１１月２３日 金曜日 午後１時１３分