Owner`s manual

Specifications and requirements
15
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Min. cold cranking amps (CCA/SAE):
680 A
Min. marine cranking amps (MCA/ABYC):
770 A
Min. reserve capacity (RC/SAE):
160 minutes
Maximum generator output:
70 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
1.75(21/12)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F225CA M/T
F250CA M/T
F250DET1 M/T
F300BET1 M/T
F300CA M/T
FL250DET1 ML/TL
FL300BET1 ML/TL
LF225CA ML/TL
LF250CA ML/TL
LF300CA ML/TL
Fuel and oil:
Recommended fuel:
F225CA Regular unleaded gasoline
F250CA Regular unleaded gasoline
F250DET1 Regular unleaded gaso-
line
F300BET1 Premium unleaded gaso-
line
F300CA Premium unleaded gasoline
FL250DET1 Regular unleaded gaso-
line
FL300BET1 Premium unleaded gas-
oline
LF225CA Regular unleaded gasoline
LF250CA Regular unleaded gasoline
LF300CA Premium unleaded gaso-
line
Min. pump octane number (PON):
F225CA 87
F250CA 87
F250DET1 87
F300BET1 89
F300CA 89
FL250DET1 87
FL300BET1 89
LF225CA 87
LF250CA 87
LF300CA 89
Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke
outboard motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter re-
placement):
6.0 L (6.34 US qt, 5.28 Imp.qt)
Engine oil quantity (with oil filter replace-
ment):
6.3 L (6.66 US qt, 5.54 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Yamalube Marine Gearcase Lube or
Hypoid gear oil
Recommended gear oil grade:
SAE 80W API GL-5 /
SAE 90 API GL-5
Gear oil quantity:
1.040 L (1.099 US qt, 0.915 Imp.qt)
6CE-9-34-1E0.book 15 ページ ２０１２年１１月２３日 金曜日 午後１時１３分