Specifications

SPEC
L-22
2-8
MAINTENANCE SPECIFICATIONS
Part to be tightened
Parts
name
Thread
size
Q'ty
Tightening torque Remark
Nm m.kg ft.lb
Cylinder Head
Bolt M8 4 22 2.2 17
Bolt M62101.07.2
Spark Plug - M12 1 17.5 1.75 12.6
Cylinder Head Side Cover Bolt M6 2 10 1.0 7.2
Valve Cover - M45 2 17.5 1.75 13
CDI Magneto Rotor Bolt M6 1 70 7.0 51
Stopper Guide Bolt M6 1 10 1.0 7.2
Adjust Screw Nut M5 2 8 0.8 5.8
Sprocket (Timing Chain) Bolt M8 1 20 2.0 14.5
Plate To Head Cylinder Bolt M6 1 10 1.0 7.2
Plug (Tensioner Assembly) Plug M8 1 8 0.8 5.8
Tensioner Assembly Bolt M6 2 10 1.0 7.2
Oil Pump Assembly Screw M6 2 7 0.7 5.1
Drain Plug Screw M12 1 20 2.0 14.5
Pump Cover Screw M5 1 4 0.4 3.6
Intake Manifold Bolt M6 2 10 1.0 7.2
Carburetor Joint (Manifold) Bolt M6 2 10 7.2 7.2
Carburetor Joint (Air filter) Screw M4 1 2 0.2 1.5
Air filter Case Bolt M6 2 7 0.7 5.1
Muffler (Cylinder Head) Bolt M6 1 7 0.7 5.1
Muffler Assembly Bolt M8 1 15 1.5 11
Crankcase 1 and 2
Bolt M62101.07.2
Bolt M66101.07.2
Bolt M62101.07.2
Crankcase Cover 1
Bolt M65101.07.2
Bolt M62101.07.2
Cover Chain Case 1 Screw M6 2 7 0.7 5.1
Crankcase Cover 2
Bolt M67101.07.2
Bolt M62101.07.2
Plate Screw M6 1 7 0.7 5.1
Timing Mark Check Plug Screw M14 1 7 0.7 5.1
Center Plug Screw M32 1 7 0.7 5.1
Kick Crank Assembly Nut M12 1 50 5.0 36
Primary Drive Gear Nut M12 1 70 7.0 51
Pressure Plate Bolt M8 4 6 0.6 4.3
Clutch Boss Nut M12 1 60 6.0 43.5 Use Lock W.
Push Rod Nut M6 1 8 0.8 5.8
Plate Nut M6 2 7 0.7 5.1
Drive Sprocket Nut M6 1 10 1.0 7.2
TIGHTENING TORQUE (ENGINE)