User Manual

ManualsBrandsYamaha ManualsMixerMixer Digital

EQ and Dynamics

V5 Reference Manual

I EQ ON/OFF button

Switches the EQ on or off.

J EQ IN/OUT level meters

Indicates the peak level of signals before and after the EQ. For a stereo channel, these

meters indicate the level of both the L and R channels.

K EQ parameter setting knobs

Indicates the Q, FREQUENCY, GAIN parameters, and BYPASS button for the LOW, LOW

MID, HIGH MID, and HIGH bands. You can use the [TOUCH AND TURN] knob to adjust

this.

NOTE

• If the shelving type has been selected for the LOW band, or if HPF is selected for an output

channel, the LOW band Q parameter will not appear.

• If shelving type has been selected for the HIGH band, or if LPF is selected, the HIGH band Q

parameter will not appear.

• When the BYPASS button is on, the Q, FREQUENCY, and GAIN knobs for that band turn gray.

L HPF ON/OFF button (input channels only)

Switches the HPF on or off.

NOTE

Input channels provide a high-pass filter that is independent of the four-band EQ. Turn on the

HPF ON/OFF button, and use the HPF FREQUENCY knob to adjust the cutoff frequency.

M HPF FREQUENCY knob (input channels only)

Indicates the cutoff frequency of the HPF. You can use the [TOUCH AND TURN] knob to

adjust this.

N HPF type select button (input channels only)

Switches the HPF attenuation per octave between -12 dB/oct and -6 dB/oct.

O HA HPF ON indicator

Indicates the HPF on/off status of the external head amp.

P FREQUENCY

Indicates the HPF cutoff frequency of the external head amp.

HPF/EQ window (8ch)

This window displays the input channel or output channel EQ settings in groups of 8 channels

simultaneously. Use the knobs in the SELECTED CHANNEL section to edit the EQ settings.

1 Channel select button

Selects the channel that you want to control. The current channel icon and number

appear on the button, and the channel name appears immediately below the button.

2 EQ graph

Displays the parameter values for the EQ and filter. The currently-selected EQ type

appears below the graph.

3 EQ ON/OFF button

Switches the EQ on or off. The OVER indicator (located to the right above the button)

lights if the post-EQ signal is clipping.

4 HPF FREQUENCY knob (input channels only)

Indicates the cutoff frequency of the HPF. You can use the knobs in the SELECTED

CHANNEL section to adjust this.

5 HPF ON/OFF button (input channels only)

Switches the HPF on or off.