User Manual

EQ and Dynamics

V5 Reference Manual

2 EQ type buttons

Set the EQ type to PRECISE, AGGRESSIVE, SMOOTH, or LEGACY.

3 GLOBAL DESTINATIONS buttons

Set for each category the channels that you set for the selected EQ type. Multiple

selections are possible.

If you select 8BandPEQ, the selected EQ type will be set as the default setting.

Using dynamics

Input channels feature two dynamics processors; output channels feature one dynamics

processor.

NOTE

• The DYNAMICS 1/2 field on the OVERVIEW screen displays the dynamics on/off status and the

amount of gain reduction.

• Dynamics settings can be saved and recalled at any time using the dedicated library. You can

also take advantage of a wide variety of presets suitable for various instruments or situations.

• You can also access the SELECTED CHANNEL VIEW screen, and use the knobs in the

SELECTED CHANNEL section to edit the dynamics settings on page 9.

• Even when the DYNAMICS 1/2 window is displayed, you can use the knobs in the SELECTED

CHANNEL section to control the dynamics.

STEP

1. Use the Bank Select keys and the [SEL] keys to select the channel for which you want

to control the dynamics.

Press the THRESHOLD knob in the DYNAMICS1/DYNAMICS2 field in the SELECTED

CHANNEL VIEW screen.

3. Press the 1 ch tab in the DYNAMICS1/2 window.

4. Press the DYNAMICS ON button, and adjust the dynamics parameters.

SELECTED CHANNEL

VIEW screen

DYNAMICS1/2 window