User Manual

I/O devices and external head amps

Reference Manual

132

I/O DEVICE screen (AMP page)

1 Display switch buttons

Press one of these buttons to view the corresponding I/O device.

For more information about VIRTUAL/CONFLICT/DUPLICATE displayed below this

button, refer to

1 on page 127, “I/O device list.”

2 ID/Model name display

This shows the ID number, model name, and version of the I/O device.

3 DANTE SETUP button

Press this button to open the DANTE SETUP window, in which you can make settings

for the audio network.

Remotely controlling WIRELESS unit

This section explains how to remotely control a WIRELESS unit that’s connected to the Dante

connector.

I/O DEVICE screen (WIRELESS page)

1 Display switch buttons

Press one of these buttons to view the corresponding I/O device.

For more information about VIRTUAL/CONFLICT/DUPLICATE displayed below this

button, refer to

1 on page 127, “I/O device list.”

2 ID/Model name display

This shows the ID number, model name, and version of the I/O device.

1 2

STEP

1. Press the WIRELESS tab in the upper part of the I/O DEVICE screen.

2. Press the I/O device displayed in the I/O DEVICE screen (WIRELESS page).

3. Set the output port on the OUTPUT PATCH window, as necessary.

Refer to step 7 in “I/O device patching” on page 127.

1 2