User Manual

Channel Job

Reference Manual

Moving the parameters of a channel

The settings of a specific input channel can be moved to a different input channel. When you

execute a Move operation, the numbering of the channels between the move-source and

move-destination will move forward or backward by one.

You can move settings between the following combinations of channels.

• Between input channels

• Between ST IN channels

CH MOVE MODE window

1 SOURCE CH field

Displays the move-source channel. While this window is displayed, press a [SEL] key on

the top panel to select an input channel. The selected channel will be highlighted in this

field. If you want to re-select the move-source channel, press this field.

2 DESTINATION CH field

Displays the move-destination channel. When you specify the move-source, you can

then select the move-destination input channel by pressing its [SEL] key on the panel.

When the move-destination channel is selected, this field will be highlighted. If you

want to defeat the selected move-destination channel, press the DESTINATION CH field.

NOTE

In the case of the QL1, faders that do not exist on the model will not be shown.

3 MOVE button

Executes a move operation. After selecting the move-source channel and

move-destination channel, the channel settings move from the move-source to the

move-destination. The settings of all channels between the move-source and

move-destination will shift toward the move-source by one channel.

STEP

1. In the Function Access Area, press the CH JOB button.

2. Press the MOVE button in the CH JOB menu.

3. Press a [SEL] key to select the move-source channel.

4. Press the [SEL] key for the move-destination channel.

5. To execute the move, press the MOVE button.

1 2 3 4 5

1 5 2 3 4

Move by one.

Move

CH JOB

Function

Access Area

1 2