User Manual

Monitor and Cue functions
Reference Manual
90
2 DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals.
• DIMMER LEVEL knob
Adjusts the amount by which the monitor signals will be attenuated when the dimmer
is on.
• DIMMER ON button
Switches the Dimmer function on or off. The monitor signal will be attenuated if this
button is on.
3 TALKBACK DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals when TALKBACK is on.
• TALKBACK DIMMER LEVEL knob
Adjusts the amount by which the monitor level will be attenuated when talkback is on.
• TALKBACK DIMMER ON indicator
Indicates the on/off status of the dimmer function for talkback.
4 PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level.
If this button is on, the MONITOR FADER LEVEL knob and monitor fader will adjust the
level of the signal sent to the PHONES OUT jack.
5 CUE INTERRUPTION button
Press this button to interrupt the monitor signal by the cue signal. If this button is on
and the cue is enabled, the cue signal will be sent to the monitor output. With the
factory default settings, this function is turned on. If you do not wish to send the cue
signal to the monitor output, switch this button off.
6 MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
7 MONITOR OUTPUT button
Switches the monitor output on or off.
8 MONITOR FADER field
Enables you to set and view the monitor fader that adjusts the monitor level.
• MONITOR FADER LEVEL knob
Adjusts the monitor fader level. You can use the [TOUCH AND TURN] knob to adjust the
monitor level.
• FADER ASSIGN display
This area displays the type of faders that are currently assigned as MONITOR FADER.
Indicator assignments are as follows.
9 MONITOR DELAY field
This field enables you to specify the monitor delay setting by which the monitor out
signal is delayed.
• AUTO BYPASS button
Turn this on to automatically bypass monitor delay when the cue is on.
• MONITOR DELAY knob
Adjusts the delay time for the monitor signal. The delay time is shown above the knob
in ms units, and below the knob in units of the currently-selected scale. However if the
scale is set to ms, the delay time value is not shown above the knob.
If you press this knob, you can use the [TOUCH AND TURN] knob to adjust the value.
• MONITOR DELAY ON button
If this button is on, the monitor signal will be delayed according to the setting of the
MONITOR DELAY knob.
---- No assignment
MASTER A MASTER A fader only
MASTER A+ MASTER A, as well as MASTER B fader and Custom fader bank
MASTER B MASTER B fader only
MASTER B+ MASTER B, as well as Custom fader bank
CUSTOM One of the Custom fader bank faders
CUSTOMs Multiple Custom fader bank faders