User Manual

QL Editor Owner’s Manual

103

This window shows the channels of the custom fader bank setup. To open this window, choose [Custom Fader Bank] from

[Windows] menu and then choose one of the pages.

1 Channel Patch

Click here to select the channel that will be assigned to the channel strips, from the following choices.

This patch is color-coded and indicates the type of channel as follows:

Blue: Input channels, Orange: Output channels, White: Other channels.

2 Channel Strip

Shows the channel strip that is assigned to the channel patch. This is the same as the channel strip in the Overview win-

dow. Indicates only L or R channel for the ST IN and ST channel. You can switch between L and R by clicking the [SEL]

button.

CH 1–64 (CH 1–32 on the QL1) INPUT CH 1–64 (CH 1–32 on the QL1)

STIN1L-STIN8R ST IN channel 1–8 (L/R)

MIX 1–16 MIX channel 1–16

MTRX1–8 MATRIX channel 1–8

ST L, ST R, MONO(C) STEREO channel L/R or MONO(C) channel

DCA 1–16 DCA channel 1–16

MONITOR MONITOR channel

STIN 1–8 ST IN channel 1–8

ST STEREO channel

CUE (In the ONLINE state, if MATRIX bus channels 7 and 8 can

be used as a second cue, the indication is fixed at “CUE A.”)

CUE channel

SEL CH Selected channel

SEND MSTR SEND MASTER (in SENDS ON FADER mode)

Custom Fader Bank window