User Manual

QL Editor Owner’s Manual

2 Input patch

Select the input port (s) that will be assigned to the rack, from the following choices.

This is not shown if nothing is mounted in the rack.

3 Module graphic

This area shows a graphic of the GEQ module, PEQ module or automixer that is currently assigned to the rack, and the

parameters of that module. You cannot edit the parameters in this screen.

Double-click this to open the module editor for that rack unit.

By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple

rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window

of the QL itself.

4 Output patch

Select the output port(s) that will be assigned to the rack, from the following choices.

5 GEQ Link Indicator

If a GEQ LINK is active, the GEQ Link indicator will be displayed in the left side of the rack (➥ p.67.)

6 Input meter/Output meter

These indicate the level of the signals being input and output from the rack.

7 ON

This switches the GEQ module or PEQ module between active and bypassed states. The GEQ module or PEQ module

is active when the ON button is lit.

NONE No assignment

INS1 CH1–CH64 (CH 1–32 on the QL1) Insert-out 1 of INPUT CH1–64 (1–32 on the QL1)

INS1 MIX1–MIX16 MIX channel 1–16 insert out 1

INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert out 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert-out 1 of STEREO channel L/R or the MONO channel

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-out 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert out 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert out 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-out 2 of STEREO channel L/R or the MONO channel

NONE No assignment

INS1 CH1–CH64 (CH 1–32 on the QL1) Insert-in 1 of INPUT CH1–64 (1–32 on the QL1)

INS1 MIX1–MIX16 MIX channel 1–16 insert in 1

INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert in 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert-in 1 of STEREO channel L/R or the MONO channel

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-in 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert in 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert in 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-in 2 of STEREO channel L/R or the MONO channel