User Manual

QL Editor Owner’s Manual

D SOLO

If “M.BAND DYNA” or “M.BAND COMP” are selected as the effect type, these buttons

allow you to monitor only the specified band from the three bands HIGH, MID, and LOW.

E GR meter (Gain Reduction meter)

If “M.BAND DYNA” or “M.BAND COMP” are selected as the effect type, this indicates the

gain reduction amount for the H (HIGH), M (MID), and L (LOW) bands.

F PLAY/REC (Play/Record) buttons

If “FREEZE” is selected as the effect type, you can use these buttons to record and play back the signal being input to

the effect.

G Effect parameters

This area shows the effect parameters and knobs for the currently selected effect type. It also shows the GUI screen that

are specific to the following each effect type: REV-X HALL, REV-X ROOM, REV-X PLATE, COMP276, COMP276S,

COMP260, COMP260S, EQUALIZER601, and OPENDECK.

F G