User Manual

QL Editor Owner’s Manual

PREMIUM page

1 Mount

Select a PREMIUM rack module (EQ or compressor) for mounting in the rack, from the following choices: BLANK,

Portico5033 (DUAL/STEREO), Portico5034 (DUAL/STEREO), Portico5045 (STEREO/DUAL), U76 (DUAL/STE-

REO), Opt-2A (DUAL/STEREO), EQ-1A (DUAL/STEREO), DynamicEQ (DUAL/STEREO), Buss Comp 369 (DUAL/

STEREO), and MBC4 (STEREO/DUAL).

U76 (DUAL/STEREO) can be mounted only in an odd-numbered rack, and occupies two rack spaces.

2 Input patch

Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the stereo EQ or compressor), and choose one

of the following as the signal route that will be patched to the input channel(s) of the currently selected PREMIUM rack

module.

NONE No assignment

MIX 1–16 MIX channel 1–16 (only for rack 1–2)

MATRIX1–8 MATRIX channel 1–8 (only for rack 1–2)

ST L, ST R, MONO(C) STEREO channel L/R, MONO channel (only for rack 1–2)

INS1 CH1–CH64 (CH 1–32 on the QL1) Insert-out 1 of INPUT CH1–64 (1–32 on the QL1)

INS1 MIX1–MIX16 MIX channel 1–16 insert out 1

INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert out 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert-out 1 of STEREO channel L/R or the MONO channel

1 2 3 4 56