User Manual

QL Editor Owner’s Manual
83
7 Input patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the
stereo EQ or compressor), and choose one of the following as the signal route
that will be patched to the input channel(s) of the currently selected PRE-
MIUM rack module.
The channel name is shown in the boxes immediately below.
8 Input meter
Indicates the level of the signal being input to the PREMIUM rack module.
When the stereo EQ or compressor has been selected, display the meter of
both the L/R.
9 Output patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the
stereo EQ or compressor), and choose one of the following as the signal route
that will be patched to the output channel(s) of the currently selected PRE-
MUIM module.
The channel name is shown in the boxes immediately below.
0 Output meter
Indicates the level of the signal being output from the PREMIUM rack mod-
ule.
When the stereo EQ or compressor has been selected, display the meter of
both the L/R.
NONE No assignment
MIX 1–16 MIX channel 1–16 (only for rack 1–2)
MATRIX1–8 MATRIX channel 1–8 (only for rack 1–2)
ST L, ST R, MONO(C)
STEREO channel L/R, MONO channel
(only for rack 1–2)
INS1 CH1–CH64
(CH 1–32 on the QL1)
Insert-out 1 of INPUT CH1–64
(1–32 on the QL1)
INS1 MIX1–MIX16 MIX channel 1–16 insert out 1
INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R, INS1 M(C)
Insert-out 1 of STEREO channel L/R or the
MONO channel
INS2 CH1–CH64
(CH 1–32 on the QL1)
Insert-out 2 of input channel 1–64
(1–32 on the QL1)
INS2 MIX1–MIX16 MIX channel 1–16 insert out 2
INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R, INS2 M(C)
Insert-out 2 of STEREO channel L/R or the
MONO channel
NONE No assignment
CH 1–64 (CH 1–32 on the QL1)
INPUT CH 1–64 (CH 1–32 on the QL1,
only for rack 1–2)
STIN1L–STIN8R ST IN channel 1–8 (L/R) (only for rack 1–2)
INS1 CH1–CH64
(CH 1–32 on the QL1)
Insert-in 1 of INPUT CH1–64
(1–32 on the QL1)
INS1 MIX1–MIX16 MIX channel 1–16 insert in 1
INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert in 1
INS1 ST L, INS1 ST R, INS1 M(C)
Insert-in 1 of STEREO channel L/R or the
MONO channel
INS2 CH1–CH64
(CH 1–32 on the QL1)
Insert-in 2 of input channel 1–64
(1–32 on the QL1)
INS2 MIX1–MIX16 MIX channel 1–16 insert in 2
INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert in 2
INS2 ST L, INS2 ST R, INS2 M(C)
Insert-in 2 of STEREO channel L/R or the
MONO channel
8
<
7
9
8
<
7
9