User Manual

QL Editor Owner’s Manual

5 CLEAR

These buttons clear all channels assigned to the corresponding DCA group. When you click one of these buttons a win-

dow will appear, asking you to confirm the operation. To execute the Clear operation, click the OK button.

MUTE GROUP ASSIGN page

Here you can specify the channels that will be assigned to mute groups 1–8. The upper part of the screen lets you assign

input channels to mute groups, and the lower part of the screen lets you assign output channels to mute groups.

1 Mute group

This area shows the mute group number.

2 Mute group name

This area shows the mute group name. Click this area to edit the name.

3 MUTE (MUTE MASTER)

These buttons enable/disable each input channel or output channel mute group. If the mute groups are completely

muted, they are shown in red. If the dimmer levels for those groups are set in a non-default status, they are shown in

orange.

4 Grid

This grid lets you assign channels (horizontal rows) to mute groups (vertical columns.) Currently-patched grids are

indicated by a symbol. To enable or disable an assignment, click the desired grid.

5 MUTE SAFE ON

These buttons switch Mute Safe on/off for each channel. Channels for which this button is on will be excluded from

mute groups.

12 3 64