User Manual

MonitorMix V1.3 User Guide 12
Screen areas
Toolbar
Switches between screens and provides scene information.
1
2
3
4
5 6
1 [FADER/PAN] button
Switches between the FADER screen (page 13) and the PAN screen
(page 15) when tapped.
This button will not appear when the bus for the monitor is monaural.
2 [Hide Unused Channels] button
Enable this button to hide the specific channels depending on the
Hide Unused Channels button behavior settings on the SETTINGS
screen.
While this button has been enabled, even if the SEND is switched to
off, or the SEND level is set to -∞, the applicable channel will not hide
at that moment. Set this button to disable, and then enable again to
hide the channels according to the latest status.
3 [ONLINE/OFFLINE] button
Shows the connection status with the mixer.
Tap this button when it reads ONLINE to display a message
confirming whether you wish to disconnect from the mixer. Tap “No”
to close this confirmation message without disconnecting. Tap “Yes”
to disconnect and display the SELECT MIXER screen.
Tap this button when it reads OFFLINE to directly display the SELECT
MIXER screen.
4 SCENE information display
Shows the SCENE number and name. This display will update when
a scene recall is performed in the mixer.
5 [GROUP] button
Tap to display the PERSONAL GROUP & ORDER screen (page 16).
6 [SETTINGS] button
Tap to display the SETTINGS screen (page 19).