Home Cinema Projector Owner Manual

Part Names and Functions
66
Remote Control
Indicator
Illuminates when remote control signals are
being output.
[Zoom] button (p.11)
Press to adjust the size of projected images.
[IRIS] button (p.17)
Press to adjust the brightness of images using
the lens aperture.
[ESCAPE] button (p.38, 39)
When pressed while a menu or selection menu
is being displayed, the screen changes to the
previously-displayed menu.
[ASPECT] button (p.19)
Displays a selection menu for selecting the
aspect.
[LIGHT] switch ( Setup Guide)
When the switch is tilted up or down, the
[ESCAPE], [ASPECT], [MENU] and [INPUT]
buttons light. After approximately 10 seconds
have passed, the illumination automatically
turns off.
[INPUT] button (p.7)
Lets you select the input port directly. The [A]
and [B] buttons change the "Input Signal"
setting in the order COMPONENT → RGB TV
→ RGB PC each time a button is pressed.
button (p.7, 9)
Press to turn the projector's power on and off.
[Focus] button (p.16)
Press to adjust the focus of the projection lens.
[PATT] button (p.14)
Displays a selection menu for selecting a test
pattern.
[MENU] button (p.18, 26, 37, 38, 39)
The menus turn on and off each time the [Menu]
button is pressed.
button (p.11, 14, 16, 17, 18, 19, 27,
37, 38, 39)
Press to display the line menu.
When tilted vertically or horizontally while a
menu or selection menu is being displayed, a
menu command is selected, and if the button is
pressed, the selected command is executed or
confirmed.
[INPUT] button (p.7)
Displays a selection menu for selecting the
image source.
[HIDE] button (p.35)
The projected images switch off and on each
time the [HIDE] button is pressed.
When the images are switched off, the screen
will appear in accordance with the setting made
using the “Hide Screen” command in the
“Setup” menu.
However, the video playback still continues
while moving images are paused, so image
playback will not resume exactly from the point
where playback was paused.
[MEMORY] button (p.27)
Retrieves the settings stored using the "Memory
Save" command in the "Image" menu and
applies them to the projected images.
456
123
VIDEO
HIDE
INPUT
MENU
PAT TIRIS SETTING
ASPECT
ZOOM FOCUS
ESCAPE
LIGHT
BD4
S VIDEO A
INPUT
MEMORY
HDMI