Owner`s manual

Using the Menu Functions
36
This sets the display language for messages and menus. (Default setting:English
(Varies depending on country of purchase))
This returns all adjustment values in the "Setup" menu (other than the "User's Logo", "Input Signal" and
"Language" command settings) to their default values.
The "Info" menu shows information about the operating status of the projector such as lamp usage time,
image source, input signal, input resolution, video signal format, refresh rate and sync information.
This initialises the lamp operating time. When this command is selected, the cumulative operating time for
the lamp is cleared and returned to the default setting.
This resets (clears) all settings that have been stored using the "Memory Save" command.
This resets all menu command settings. However, the "Memory Save", "User's Logo", "Input Signal", "Lamp
Hours" and "Language" settings are not reset.
Input Signal
Main menu Function
Default
setting
Video Signal Sets the signal format in accordance with the video equipment that is connected to the
VIDEO or S VIDEO port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being
projected occurs even though "Auto" has been selected, select the correct signal format
manually.
Auto
Input A Sets the signal format in accordance with the video equipment that is connected to the
INPUT A or INPUT B port or the signal being output from a computer.
Component
Input B
Language
Reset
"Info" Menu
"Reset" Menu
Lamp-Hours Reset
Memory Reset
All Reset
LPX-510_E.book Page 36 Wednesday, January 21, 2004 10:58 AM