Owner's Manual

En 11
English
Using the SMART TIMER
The SMART TIMER allows you to turn on the lighting at the brightness you set and play back your favorite music as a wake-up timer every morning. You can also
turn off the lighting and stop music playback automatically while you are in bed listening to music.
SMART TIMER can be used only when the unit is connected to a power source.
What the SMART TIMER can do
Setting the SMART TIMER
SMART TIMER settings can be performed with a smart phone or tablet that has the DTA CONTROLLER application (& P.6)
installed.
1 Connect a device via Bluetooth connection (& P.8, 9).
2 Start DTA CONTROLLER on the device and make the SMART TIMER
settings.
3 Synchronize the SMART TIMER with the unit by DTA CONTROLLER.
• Be sure to synchronize the SMART TIMER with the unit every time you perform the SMART TIMER
setting.
On-timer Off-timer
• Turn on the lighting at a specified time.
• Specify the brightness of the lighting.
• Play back the music of a connected device at a specified time.
• Specify a song.
• Preset the volume level.
• Turn off the lighting at a specified time.
• Turn off the power at a specified time.
Due to product improvements, specifications and appearance are subject to change without notice.
• To play back a song via Bluetooth connection at a
set time, it is required that the Blue tooth function
of your smart phone or tablet is turned on.
Additionally, in the case of an iPhone, do not quit
DTA CONTROLLER while multitasking.
• If another Bluetooth device is connected to the
unit at the time you set, the song you set as the
on-timer will not be played back. Disconnect any
other device before the time you set.
• The on-timer and off-timer of the SMART TIMER
can be activated/deactivated by DTA
CONTROLLER only.
Inner clock of the unit
• The unit copies the time to the unit’s inner clock
from DTA CONTROLLER when a device connects
to the unit via Bluetooth connection. The SMART
TIMER follows the unit’s inner clock.
• If you disconnect the AC adaptor and the
remaining battery level completely runs out, the
clock setting will reset and SMART TIMER will turn
off.