Owner`s manual

EMU01175
BREAKING IN (RUNNING IN)
ENGINE
Your new engine requires a period of
break-in (running-in) to allow mating sur-
faces of moving parts to wear-in evenly.
Correct break-in (running-in) will help
ensure proper performance and longer
engine life.
cC
8 Failure to follow the break-in (running-
in) procedure may result in reduced
engine life or even severe engine dam-
age.
8 Premix fuel must be used during break-
in (running-in) in addition to oil in the
Precision Blend System.
8 After break-in (running-in), use gaso-
line(petrol) only. If premix fuel is used
continually, the oxygen sensor for
Electronic Fuel Injection system could
be damaged.
EMU00225
Gasoline (Petrol)/ Engine oil mixing chart
cC
Make sure to mix gasoline (petrol) and oil
completely, otherwise your outboard
motor may be damaged.
Mixing
ratio
E
3-10
50 : 1
Gasoline
(Petrol)
1 L
(0.26 US gal,
0.22 Imp gal)
12 L
(3.2 US gal,
2.6 Imp gal)
14 L
(3.7 US gal,
3.1 Imp gal)
24 L
(6.3 US gal,
5.3 Imp gal)
0.02 L
(0.02 US qt,
0.02 Imp ql)
0.24 L
(0.25 US qt,
0.21 Imp qt)
0.28 L
(0.30 US qt,
0.25 Imp qt)
0.48 L
(0.51 US qt,
0.42 Imp qt)
Engine oil
Break-in (running-in) time:10 hours
Break-in (running-in) premix ratio
Gasoline (petrol) : Engine oil=50 : 1
67K-9-13-3 4/19/01 10:43 AM Page 11