Owner`s manual

Trouble Recovery
78
2. Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU31780
Water separator warning indicator
blinks while cruising
WARNING
EWM01500
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator warning indicator on
the tachometer blinks, perform the following
procedure.
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler.
CAUTION:
ECM01570
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
4. Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
1. Manual valve screw
ZMU05018
1
1. Water separator warning indicator
1. Water detection switch coupler
1
ZMU05502