manual

Page 26/62 GEO M6 HARDWARE SETUP PROCEDURE
WARNINGS ON GEO M6 ACCESSORIES 8.2.6
WARNING 1
All GEO M6 Accessories are specifically rated in agreement with structural
computations.
Never use other accessories – including push-pins - when assembling GEO M6
cabinets than the ones provided by NEXO: NEXO will decline responsibility over the
entire GEO M6 accessory range if any component is purchased from different supplier.
WARNING 3
All GEO M6 accessories have been designed so that cabinets are arrayed vertically.
GEO M6 horizontal assemblies as shown in figure below- are UNSAFE and STRICTLY
PROHIBITED.
NO YES
8.3 Installing GEO M6
IMPORTANT
In order to prevent screws from getting loose in fixed installations, use blocking liquid
LOCTITE
TM
243 or equivalent for all screws used with GEO M6 fixed installation
accessories.
LOCTITE
TM
243 is available at NEXO or at your local distributor upon request.