User's Manual

GEO M6 HARDWARE SETUP PROCEDURE Page 29/62
4 to 12 (maximum) GEO M6 ceiling mounted 8.3.3
Required items
- 1 x GMT-BUMPER
- 4 to 12 x GMT-BNFIX
- 4 x 8mm diameter screws (not provided)
IMPORTANT
Ensure that the ceiling is strong enough to hold GEO M6 cluster weight and that the
four screws 8 mm diameter and corresponding plugs required to fix the bumper under
the ceiling are properly dimensioned.
Procedure
- 8mm diameter screws (not provided) are required to fix the GMT-BUMPER to the ceiling;
- Connect the bumper to top cabinet by inserting the GMT-BNFIX axis through front holes and secure
axis and rear link with GMT-BNFIX screws;
- Connect subsequent cabinets with GMT-BNFIX at required inter-angle values;
NB: please note that top cabinet angle will be 0° in relation to the bumper