User Manual

M7CL Editor Owner’s Manual
4
Creating a user key
To open the Create User Key window, choose [Create User Key] from the [File] menu.
This creates a user key (with .M7U” file name extension) that can be read from a USB storage device by the
M7CL console to automatically set user-specific parameters.
A User Name
Specify the name of the user. You can enter up to eight single-byte characters of alphabet and numerals.
B Comment
Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters.
C Password
Enter a password that will be used when this user key is read by the M7CL console. You can enter up to eight sin-
gle-byte alphanumeric characters. Uppercase and lowercase are distinguished.
D Re-Enter Password
Enter the password once again as a safeguard against mistaken entry.
E POWER USER
Specify whether this user is a power user. Power users can use the M7CL console to create or edit a user authenti-
cation key with a specified user level.
F Administrator Password
Enter the Administrator password that was specified on the M7CL console. This is not required if no Administra-
tor password has been specified on the M7CL console, but if this password is incorrect you will be asked to enter
it when the user key is read.
G ACCESS PERMISSION
In this area, specify the parameters that this user will be allowed to operate.
2 465
1
3
7
8
9
J
K
L
N
O P
M