User Manual

M7CL V3 Editor Installation Guide 6
When you connect the computer to the M7CL directly
• Settings of the M7CL
You can use the following initial settings.
• Settings of the computer
We recommend that you make the following settings.
When you connect the computer to the M7CL via LAN
Make the network settings of the M7CL and your computer in accordance with your LAN. Please contact your
network administrator for further details. Also, please refer to “Caution for connecting M7CL to LAN” in the
“Technical Documents” section on the following web site:
http://www.yamahaproaudio.com/downloads/documents/
• Settings of the M7CL
Network Settings
IP address 192.168.0.128
Gateway address 192.168.0.1
Subnet mask 255.255.255.0
IP address 192.168.0.3
Subnet mask 255.255.255.0
Default gateway (Router) 192.168.0.1
IP address Set the IP address so that it does not conflict with the IP address of any other device on
the network.
Gateway address Set the IP address of the gateway when the gateway exists. Set the vacant address
when the gateway does not exist. The address should be set in the same subnet as IP
address within LAN in which the subnet is set.
Subnet mask Set the subnet mask of the subnet connected to the M7CL.