User Manual

M7CL Owner’s Manual

Using the Monitor function

144

To enable monitoring, press the OUTPUT

button to turn it on.

The monitor source you selected in step 4 will be sent

to the output destination you speciﬁed in step 5.

To adjust the monitor level, use the MONI-

TOR LEVEL knob located in the SCENE

MEMORY/MONITOR section of the top

panel.

If PHONES LEVEL LINK is ON, you can use both

the MONITOR LEVEL knob and the PHONES

LEVEL knob to adjust the monitor level when moni-

toring through headphones.

The MONITOR LEVEL knob will apply to the

PHONES OUT jack as well.

Make settings for Dimmer, Delay, and Mon-

aural as desired.

• If desired, you can specify output ports only for MONITOR

OUT L and R, and monitor through two speakers.

• If you have not speciﬁed an output port for MONITOR OUT C,

selecting the MONO (C) button or LCR button as the monitor

source will automatically cause the MONO channel signal to

be distributed to MONITOR OUT L/R.

HINT

• The PHONES OUT jack will always output the monitor signal,

regardless of whether the OUTPUT button is on or off.

HINT

• Monitor on/off operations, selection of the monitor source,

and dimmer on/off operations can also be assigned to user-

deﬁned keys (

→

p. 200).

HINT