User Manual
M7CL Owner’s Manual
184
1 CH field
Select CH 1–CH 16 as the channel that will be used to
transmit or receive MIDI messages.
7
Select the channel.
Use the ↑/↓ buttons to select an item. Press the OK
button to confirm the selected channel and close the
MIDI SETUP popup window.
8
Turn transmission/reception on or off for
each MIDI message.
The M7CL lets you assign a specific event (scene recall or effect library recall) to each program
change number, so that when this event is executed on the M7CL, a program change message
of the corresponding number will be transmitted to an external device. Conversely, the corre-
sponding event can be executed when a program change message is received from an external
device.
1
Connect the M7CL to your external device.
The following illustration shows an example of using
the MIDI IN/OUT connectors to transmit and receive
MIDI messages.
2
In the function access area, press the
SETUP button to access the SETUP screen.
3
In the center of the screen, press the MIDI
button to access the MIDI popup window.
4
Press the MIDI SETUP tab to access the
MIDI SETUP page, and select the port and
MIDI channel on which program changes
will be transmitted and received, as
described in “Basic MIDI settings” (→
p. 182).
5
Press the PROGRAM CHANGE tab to
access the PROGRAM CHANGE page.
In the PROGRAM CHANGE page you can specify
how program changes will be transmitted and
received, and choose the event (scene recall or effect
library recall) that will be assigned to each program
number.
This page includes the following items.
• Alternatively, you can select the channel by pressing the
desired channel in the field or by turning one of the multifunc-
tion encoders.
• When transmitting or received parameter changes, the chan-
nel number you specify here is used as the device number (a
number that identifies the transmitting or receiving unit).
HINT
•For details on using program changes, refer to “Using pro-
gram changes to recall scenes and library items,” below.
•For details on using control changes, refer to “Using control
changes to control parameters” (
→
p. 187).
HINT
Using program changes to recall scenes and library items
M7CL
MIDI OUTMIDI IN MIDI OUTMIDI IN
external
device
MIDI button
1
3
2
4
5
6
Basic MIDI settings • Using program changes to recall scenes and library items