User Manual

Top panel

Panels and controls

M7CL Owner’s Manual

In this section you can select the channels that will be con-

trolled by the Centralogic section and in the touch screen.

1 [IN 1-8] key

[IN 9-16] key

C [IN 17-24] key

D [IN 25-32] key

These keys select INPUT channels 1–8, 9–16, 17–24, and

25–32 respectively.

E [ST IN] key

This key selects ST IN channels 1–4.

F [DCA] key

This key selects the DCA groups.

G [MIX 1-8] key

H [MIX 9-16] key

These keys select MIX channels 1–8 and 9–16 respec-

tively.

I [MATRIX] key

This key selects MATRIX channels 1–8.

J [STEREO] key

This key assigns the STEREO channel L/R and the

MONO channel to modules 1–3 of the Centralogic sec-

tion. In this case, modules 4–8 are not used.

K [IN 33-40] key {M7CL-48 only}

L [IN 41-48] key {M7CL-48 only}

These keys select INPUT channels 33–40 and 41–48

respectively.

■ NAVIGATION KEYS section

• If you press and hold a navigation key for two seconds or longer,

that key will blink. At this time, only the object of control for the

Centralogic section will be changed to the corresponding channels

and ﬁxed. If you press a different navigation key while the ﬁrst key

is blinking, only the object of control in the touch screen will be

changed.

NOTE

1 2 5

3 4

J K