User Manual
Functions that can be assigned to user-defined keys
253
M7CL Owner’s Manual
Appendices
FUNCTION PARAMETER 1 PARAMETER 2 Explanation
NO ASSIGN — — No assignment.
SCENE
INC RECALL — Recall the scene of the next existing number.
DEC RECALL — Recall the scene of the previous existing number.
DIRECT RECALL SCENE #000–#300 Directly recall the scene of the specified number.
RECALL UNDO — Execute RECALL UNDO.
STORE UNDO — Execute STORE UNDO.
TALKBACK
TALKBACK ON
LATCH Switch TALKBACK on/off.
UNLATCH Turn TALKBACK on while pressed.
SELECTED CH ASSIGN —
While holding down this key, press a SEL key of an OUTPUT
channel to switch the assignment on/off. During this time,
the [SEL] LED will be lit if assign is ON, or dark if OFF.
OSCILLATOR
OSCILLATOR ON —
Switch the OSC on/off.
The OSC popup window will appear when this is turned on.
SELECTED CH ASSIGN —
While holding down this key, press a SEL key of an OUTPUT
channel to switch the assignment on/off. During this time,
the [SEL] LED will be lit if assign is ON, or dark if OFF.
CUE CLEAR — — Clear all CUE settings together.
MONITOR
MONITOR ON — Switch MONITOR on/off.
SELECTED CH ASSIGN —
While holding down this key, press the SEL key of a MIX or
MATRIX channel to switch the assignment on/off. During this
time, the [SEL] LED will be lit if assign is ON, or dark if OFF.
SOURCE SELECT
STEREO L/R, MONO(C), LCR,
STIN1–4, DEFINE
Recall the selected signal to the monitor.
DIMMER ON — Switch the monitor dimmer function on/off.
MONO MONITOR — Switch MONO MONITOR on/off.
EFFECT BYPASS RACK 5–8 — Bypass the specified effect.
TAP TEMPO
CURRENT PAGE — Use the tap tempo function in the displayed screen.
RACK 5–8 — Use the tap tempo function for the specified effect.
MUTE MASTER MUTE GROUP 1–8 — Switch MUTE GROUP MASTER on/off.
METER PEAK HOLD ON — Turn the meter PEAK HOLD function on/off.
BRIGHTNESS BANK CHANGE — Toggle between the brightness settings stored in A and B.
PAGE CHANGE
PAGE BOOKMARK —
Memorize the currently selected screen (hold down the key
for two seconds or longer), or display the last-memorized
screen (press and release the key within two seconds). Popup
screens can also be memorized. In the case of a rack, the
number of that rack is also memorized.
CLOSE POPUP — Close the displayed popup window.
CH SELECT INC, DEC — Decrement the channel selection.
SEND ENCODER TO MIX/TO MATRIX —
If INPUT or ST IN is selected, swich the function of the
Selected Channel section's send encoders from TO MIX/TO
MATRIX.
SET BY SEL
SET [+48V] —
Hold down this key and press SEL to switch it on/off.
During this time, the [SEL] LED will be lit if on or dark if off.
SET [Ø] —
SET [PRE SEND] —
SET [TO STEREO] —
SET [TO MONO] —
SET [TO LCR] —
SET DEFAULT VALUE — —
While holding down this key, push an encoder of the Selected
Channel or Centralogic section to reset it to the default value.
SET NOMINAL LEVEL — —
While holding down this key, press a [SEL] key to set the fader
of that channel to nominal level.
SENDS ON FADER MIX1–16 — Recall the Sends On Fader function to the selected MIX.
Functions that can be assigned to user-defined keys